• signs in china Home
  • |
  • Entra o registrate
  • |
  • Mi cuenta
  • |
  • Live Chat
Tel:+502 33657004/22338371/58321280
Horas de trabajo
6020T Automatic Fiber Laser Tube Cutting Machine
  • 6020T Automatic Fiber Laser Tube Cutting Machine
  • 6020T Automatic Fiber Laser Tube Cutting Machine
  • 6020T Automatic Fiber Laser Tube Cutting Machine

Ver imagen más grande y otras vistas (con zoom)

6020T Automatic Fiber Laser Tube Cutting Machine

   |   13 Transacciones

Codigo del articulo:SIT-FIBER-6020T

  • Precio : Q 1,199,996/set   (Aviso de Descuento) (Tiempo entrega 69-89 días)

  • Por Favor Eliga el Tipo

    Por Favor Eliga el Tipo: 1000W/Raycus 1000W/IPG
  • Cantidad: set(s) Costo Total : Q1,199,996
  • Peso de Envio: 15620.0lb (7100kg) freightFlete

Buyer Protection

6020T Automatic Fiber Laser Tube Cutting Machine 

Introduction:
6020T fiber laser tube cutting machine is a fully automatic laser tube cutting machine. This series of products is the preferred model in metal pipe processing industry. The bed is made of honeycomb carbon structure after annealing treatment and welded by precision welding process. It has extremely high strength and stability. The running speed of the machine can reach 80 m/min,which is can process round pipes with diameter less than 200 mm and square pipes with side length less than 140 mm.

Specification:
Model 6020T
Laser device 1000W Raycus/IPG
Cutting length of pipe 0~6000mm
Cutting Diameter of Pipe 20~200mm
Wavelength 1060-1080 nm 
Beam quality (BPP,mm*mrad) 1.27
Positioning accuracy ±0.05mm/m
Repeated positioning ±0.03mm/m
Maximum airspeed 80m/min
Controlling system TubePro
Electromechanical SCHNEIDER
Cutting bed 6020T
Water cooling Specialized
Dust exhausting fan Specialized
Document Specialized
Document Operating
Power parameters Three-phase AC 380V 50Hz
Protection Level of Total Power Supply IP54
Outline size 9000x2900x2400

Features:
The machinery is composed of bed, Z-axis device, operation part, air-way and water-way, etc, which is equipped with German equipment layout, with fast speed, design and manufacture of reinforced precision welding bed, two aging treatments to ensure the accuracy and stability of long-term operation of the bed, good rigidity and high acceptance of acceleration; the bed adopts steel structure precision welding, stress failure treatment, large gantry with guide seat. Processing from the center.

The special numerical control system for laser pipe cutting machine is selected: TubePro pipe cutting software and TubesT pipe sleeving software. CypCut TubePro pipe cutting software is a professional cutting software for processing various types of pipe. Perfect seamless docking with layout software Tubes T. Tubes T achieves parts layout, common edge, basic process and special process processing. After exporting the processing file, it can be cut directly by TubePro.

(1) Obtaining the center deviation in the process of machining 
TubePro can acquire the deviation between the center of pipe and the center of chuck rotation by collecting the Z-axis information in real time during processing. Real-time compensation for subsequent cutting graphics is carried out to achieve high precision processing. 

(2) Two modes 
TubePro can select processing mode before processing. The first mode is to use fixed tools, suitable for drilling the cut pipe, and the second mode is to use the Y axis of the cutting head as a tool for processing at any time and anywhere.

(3) Seven-Axis Drawing Material 
TubePro supports two chucks and seven-axis machines. After setting up the seven-axis mode, zero tailings can be processed through a moving chuck and a fixed chuck, thus saving more pipe materials for customers. 

(4) Bracket 
When a long pipe is processed, a bracket is usually needed to support the pipe. TubePro supports the bracket function. During the whole processing, the bracket can rise or fall automatically according to the position of the chuck, and the bracket has automatic alarm function to ensure absolute safety between the chuck and the bracket. At the same time, brackets can be used to achieve the purpose of automatic blanking. 

(5) Corner Technology 
TubePro specially introduces the process of pipe corner to solve the problems of difficult cutting and poor cutting. Through debugging and testing, a set of reasonable corner pressure, peak power, duty cycle and so on are set to make the cutting of pipe corners faster and more perfect. 

(6) Z-axis follow-up control 
When cutting pipes, there are usually situations where the corner can not be cut well. When TubePro is processed, the Z-axis not only plays the role of following and lifting, but also controls instructions. 
TubePro automatically calculates the height difference between the tube before and after rotation based on the cross-section information of the graph, and sends an upward or downward instruction to the Z-axis on the basis of random cutting at the corner. 

(7) Rapid operation 
TubePro can ensure the reasonable height of Z axis according to the section of pipe in West Sydney and the location of pipe hole. In the process of air movement, the three axes of XYB and Z axes move simultaneously, avoiding the time of Z axis rising and following the time, so as to achieve high efficiency. 

(8) Cutting of profiled steel 
TubePro not only supports the cutting of circular and square tubes. At the same time, it also supports the cutting of various profiles. For example, I-beam, channel, angle, elliptical, waist, polygon and so on. For these special-shaped pipes, the center deviation can also be automatically obtained。

Application & Capability:
1. Cutting materials: carbon steel, stainless steel, aluminum alloy, brass, copper, galvanized steel, silicon steel plate, electrolytic plate, titanium alloy, manganese alloy; 
2. Cutting range: 0.5-12mm carbon steel, 0.5-6mm stainless steel, 0.5-6mm aluminum alloy, 0.5-6mm brass;


3. Applied industries:Rail transit, automobile, construction machinery, agricultural and forestry machinery, electrical manufacturing, elevator manufacturing, household appliances, grain machinery, textile machinery, tool processing, petroleum machinery, food machinery, Kitchenware and bathroom, decorative advertising, laser processing services and other machinery manufacturing and processing industries;

Certification:


Factory:


 

1. I don’t know this website well, how can I trust you?
2. Not clear about the Price Policy of Sign-in-China.com?
3. How to pay? Can I use credit card?
4. Is it safe to pay online? Will it occur any security problems concerning my personal information?
Mensaje rápido para este producto
6020T Automatic Fiber Laser Tube Cutting Machine

6020T Automatic Fiber Laser Tube Cutting Machine

Q1,199,996/set

Min. Order : 1 set

  • *Correo de empresa:
  • *Nombre:
  • Telefono:
  • +86(10) 6370-5868
  • *Mensaje:
  • caracteres:20(Min.) - 2000(Max.)
  • *Codigo de Verificacion:

Envio :
Enviamos a más de 200 países y 300 puertos de todo el mundo!
Por expreso: 3-5 días hábiles
Por mar: 20-60 días hábiles
¿Cuánto para que enviar a
mi casa?
Pago:
T/TTransferencia Bancaria :
:
:

Guía de vídeo :

Suscribase para obtener ofertas especiales

Recibe gratis actualizaciones, descuentos y ofertas especiales para ganar productos gratis y premios en efectivo

Encontrar mas>>

Mira nuestras promociones de esta semana.

www.sign-in-guatemala.com. es el mayor proveedor en línea de productos de publicidad en el mundo y especializados en el suministro de una solución integral para los clientes al seleccionar equipos de Publicidad, materiales de consumo articulos publicitarios, productos de publicidad, etc. También el centro de servicio en el extranjero autorizado por la Asociación China de impresión, de inyección de tinta, para lo cual hemos establecido sucursales en el extranjero, en 6 países extranjeros con el fin de brindar un mejor servicio a nuestros clientes en todo el mundo. Nuestros productos cubren todo el campo de la Publicidad y la señalización y todos los productos que suministramos se hacen de conformidad con las normas internacionales de calidad, como resultado de que, en la actualidad, tenemos más de 9000 productos en línea para la venta. Desde que implementamos la compra centralizada, todos los productos se cotizan a precios competitivos.